The rods on both sides let you go handheld right away. Both rods can be adjusted in height and position around the camera, and one side can even be completely removed if not needed. All camera connections, buttons, dials and the battery door remain fully accessible. Our custom hotshoe pinch connects your camera into one solid piece with the cage. Plenty of 1/4"-20 mounting threads allow for assembly of a full rig to your needs.This cage is very lightweight.
Canon EOS M3, 650D, 600D, 550D, 500D, 450D, 760D, 750D, 700D, 100D, 1200D;
Nikon D3200 D3300 D5200 D5500;
Sony a58, a7, a7R, a7S, a7 II, a7S II, a7R II;
The height of the cheese rods is 125mm, the width of this cage is 196mm.
If you are using a medium-sized camera, such as Canon 5D MarkII/Mark III, 7D, 60D, 6D, Nikon D800, please take a look at Medium Size Cage 1584.
2x M12-125mm Cheese Rods 1457
2x Short Arms
2x Long Arms 1643
1x Baseplate(with 1/4'' mounting screw) 1657
1x Top Plate
1x Hot Shoe Connector
2x M4 Screws
8x 1/4" Screws
2x Hex Spanners
Material: Aluminum Alloy
Net Weight: 400g